Technical Data; Transportation In Vehicle; Starting Operation; High-Pressure Hose, Spray Gun And Separating Oil - WAGNER PROSPRAY 3.20 Operating Manual

ProSpray 3.20
4.3

TECHNICAL DATA

Voltage
Max. current consumption
100 VAC~
110 VAC~
220-240 VAC~
Rated input of device
100-110 VAC~
220-240 VAC~
Power Cord
Max. operating pressure
Max. volume flow
Volume flow at 12 MPa (120 bar) with water
Max tip size
Max. temperature of the coating material
Max viscosity
Weight
Special high-pressure hose
6,35 mm, 15 m - 1/4" - 18 NPSM
Dimensions (L X W X H)
Sound pressure level*
80 dB (A); Uncertainty K = 4 dB
Sound pressure output*
93 dB (A); Uncertainty K = 4 dB
Oscillation level*
< 2.5 m/s²; Uncertainty K = 1.5 m/s²
* Measured in accordance with EN 62841-1
4.4

TRANSPORTATION IN VEHICLE

Secure the unit with a suitable fastening.
100-110 VAC~, 50/60 Hz or
220-240 VAC~, 50/60 Hz
10.5 A
12.0 A
5.3 A
1000 W
1000 W
6 m long, 3 x 1.5 mm²
207 bar (20.7 MPa)
2.0 l/min
1.60 l/min
0.021 inch – 0.53 mm
43°C
20.000 MPa·s
13.6 kg
441 x 324 x 415 mm
5

STARTING OPERATION

5.1
HIGH-PRESSURE HOSE, SPRAY GUN AND
SEPARATING OIL
1. If equipped, screw the pressure gauge (1) to the coating
material outlet (Fig. 2, Item 2).
2. Screw the high-pressure hose (3) to the coating material
outlet (Fig. 2, Item 4).
3. Screw the spray gun (5) with the selected tip onto the
high-pressure hose.
4. Tighten the union nuts at the high-pressure hoses firmly
so that coating material does not leak.
1
4
2
3
5. Fill the oil cup with EasyGlide (Fig. 3). Do not use too
much EasyGlide, i.e. ensure that no EasyGlide drips into
the coating material container.
EasyGlide prevents increased wear and tear to
the packings.
Attention
6. Fully depress the pusher stem (Fig. 3, item 1) to make
sure the inlet ball is free.
EN
DESCRIPTION OF UNIT / STARTING OPERATION
1
5
9