General Safety Instructions - WAGNER SUPER FINISH 21 PRO Operating Manual

EN
CONTENTS
Translation of the original operating instructions
Contents
1 GENERAL SAFETY INSTRUCTIONS ___________ 28
2 SAFETY REGULATIONS FOR AIRLESS SPRAYING 30
2.1 Flash point _________________________________ 30
2.2 Explosion protection _________________________ 30
2.3 Danger of explosion and fire from sources of
ignition during spraying work _________________ 30
2.4 Danger of injury from the spray jet _____________ 30
2.5 Secure spray gun against unintended operation __ 30
2.6 Recoil of spray gun __________________________ 30
2.7 Breathing equipment as protection against
solvent vapors ______________________________ 31
2.8 Prevention of occupational illnesses ____________ 31
2.9 Max. operating pressure ______________________ 31
2.10 High-pressure hose _________________________ 31
2.11 Electrostatic charging
(formation of sparks or flames) ________________ 31
2.12 Use of units on building sites and workshops _____ 31
2.13 Ventilation when spraying in rooms ____________ 31
2.14 Suction installations _________________________ 31
2.15 Earthing of the object ________________________ 31
2.16 Coating material ____________________________ 31
2.17 Cleaning the unit ___________________________ 32
2.18 Work or repairs at the electrical equipment ______ 32
2.19 Maintenance work and breaks _________________ 32
2.20 Setup on an uneven surface ___________________ 32
2.21 Oscillation level _____________________________ 32
3 GENERAL VIEW OF APPLICATION /
DESCRIPTION OF UNIT _____________________ 33
3.1 Application ________________________________ 33
3.2 Coating material ____________________________ 33
3.2.1 Coating materials with sharp-edged additional
materials __________________________________ 33
3.2.2 Filtering ___________________________________ 33
3.3 Explanatory diagram _________________________ 34
3.4 Technical data ______________________________ 35
4 STARTUP _________________________________ 36
4.1 Unit with suction system _____________________ 36
4.2 Unit with upper hopper ______________________ 36
4.3 High pressure hose and spray gun ______________ 36
4.4 Connection to the mains network ______________ 36
4.5 Cleaning preserving agent when starting-up of
operation initially ___________________________ 37
28
4.6 Ventilate unit (hydraulic system) if the sound of
inlet valve is not audible ______________________ 37
4.7 Taking the unit into operation with
coating material ____________________________ 37
5 SPRAYING TECHNOLOGY ___________________ 38
6 HANDLING THE HIGH-PRESSURE HOSE _______ 39
7 INTERRUPTION OF WORK ___________________ 39
8 CLEANING THE UNIT _______________________ 40
8.1 Cleaning the unit from the outside _____________ 41
8.2 Suction filter _______________________________ 41
8.3 High-pressure filter __________________________ 41
8.4 Cleaning the Airless spray gun _________________ 42
9 SERVICING ________________________________ 42
9.1 General servicing ___________________________ 42
9.2 High-pressure hose __________________________ 42
10 REPAIRS AT THE UNIT ______________________ 43
10.1 Inlet valve _________________________________ 43
10.2 Outlet valve ________________________________ 44
10.3 Pressure control valve ________________________ 44
10.4 Typical wear parts ___________________________ 44
10.5 Remedy in case of faults ______________________ 45
11 SPARE PARTS AND ACCESSORIES ____________ 46
11.1 Super Finish 21 Pro accessories ________________ 46
11.2 Spare parts list Super Finish 21 Pro _____________ 48
11.3 Spare parts list high-pressure filter _____________ 50
11.4 Spare parts list hopper _______________________ 50
11.5 Spare parts list suction system ________________ 51
Testing of the unit ________________________________ 52
Important information on product liability_____________ 52
Note on disposal __________________________________ 52
Guarantee declaration _____________________________ 52
EU - declaration __________________________________ 52
European service network _________________________ 108
Super Finish 21 Pro