Editing Program Parameter - Okura Yusoki A Series Manual

6.3.

Editing Program parameter

This section explains each screen for editing program parameter.
Program No.:
Group No.:
Product code:
Comment:
Size:
Height:
Weight:
Create by:
Tacc scaling:
represents program number.
represents program group number which can be changed.
It is product code of program which can be changed.
Change the product name for program
It is size (L. W. H) of product.
After changed height of product, up to 2
be shifted.
After changed weight, robot acceleration and deceleration speed
will be changed by automatically.
represents by which way of OXPA-QmV, built-in OXPA or POD a
program has been created.
Adjust an acceleration and deceleration. Negative value makes
short time of acceleration and deceleration and plus value makes
opposite.
nd
6-5
layer height data will