Variable Height Setting - Okura Yusoki A Series Manual

10.5.

Variable height setting

"Actual Height" of "Create / modify stacking program" screen was limited within the
range from -20% to +20% of original height calculated by "No. of layer" and
"Product height". When you entered the "Actual Height" out of the limit, OXPA-QmV
popped up the following alert (Fig.2), and canceled your entered value.
It is limited
10-5
Limited range
1000 x 0.8 = 800
1000 x 1.2 = 1200
Fig.2
Fig.1