Okura Yusoki A Series Manual page 101

[All copy]
The "All copy" button copies all reference sequence program to editing program.
[Syntax check]
The "Syntax check" button checks your sequence program is correct or not.
[Find and Replace]
From list view of the editing program it finds or replace the string, or. As for the line
which becomes the object of finds and replaces please set with [ Inst Cmnt Both ]
radio button.
[Find]
To enter the string which is found in the edit box [ Find ] it find with the button.
[Replace]
It enters the string and the string after the replacing are find in the edit box,
[ Replace ] it find or replace with the button. The string which is selected the string
which is found in same case it replace, when it is different, it find the string.
[Enter action]
The operation when 'Enter' is clicked while editing the instruction or the comment
is specified.
[Next line]
Turn on: The following of the selection row are edited.
Turn off: The edit of the column is ended.
[Auto insert]
It does while inserting the row next to the selection row and selecting it. When "Next
line" is only turning on, ON/OFF of "Next line" can be switched.
[OK]
The "OK" button saves your all changes.
[Cancel]
The "Cancel" button cancels all your changes.
Note
The maximum number of lines of the sequence programs is 2000 lines.
Refer to the separate "Robot Sequence Command" about how to use the sequence
commands.
6-19