Editing Tool For Reference Pattern - Okura Yusoki A Series Manual

14.5.

Editing tool for reference pattern

Editing tool for reference pattern means edit the standard pattern in OXPA-QmV (Call
Internal pattern) and original registered pattern for each robot (Call Original
pattern).
This function is able to register the new pattern to Internal pattern and Original
pattern. Also you can delete the pattern program.
14.5.1. Start up for editing tool for Reference pattern
Execute the [Qm2Koho.exe] from Start-[Program]-[Okura]. Then following screen
will be displayed.
Just after the installation of OXPA-QmV, file will not selected. Open the Internal
pattern or Original pattern from menu bar-[file]-[Open].
14-7