Okura Yusoki A Series Manual page 137

8.5.9. Parameters of "Capacity calculation"
OXPA-QmV has the following parameters.
8.5.9.1. Open
In case products are "BAG", OXPA-QmV needs the time of "WTCON" to be entered by
you.
(Maximum 20000msec)
In case products are "CASE", OXPA-QmV can simply execute "WTTMR" whatever
"Open" is.
In case E.E. type is as below, time of E.E. opening needs to be added to "Close" for
compensation.
8.5.9.2. Close
OXPA-QmV needs the time of "WTCON" to be entered by you.
(Maximum 20000msec)
8.5.9.3. Discharge
OXPA-QmV needs the time of pallet discharge to be entered by you.
(Maximum 60000msec)
Side vacuum type
Finger type Vacuum type
8-13