Start Screen Of Oxpa-Qmv - Okura Yusoki A Series Manual

1.6.

Start Screen of OXPA-QmV

After OXPA-QmV has been installed, you can start OXPA-QmV clicking on [Start] –
[Program] – [Okura] – [OXPA-QmV]. The below screen shows up for the first time
after installed. The popup screen asks you to enter serial No. So you enter your
serial No. and click on [Start] to go forward.
Once the serial number is entered for the first time, it never shows up again so you
can just press [Start] to go.
1-5