Okura Yusoki A Series Manual page 30

Note:
st
Once 1 layer is fixed, Interlock type pattern created by automatically from
following rule.
1. Stacking pattern is not liner symmetry from both side of pallet, even layer
will be 180 degrees turned.
2. Stacking pattern is bilateral symmetry, even layer will be 90 degrees
turned.
1. Stacking pattern is not liner symmetry from both side of pallet, even layer will be
180 degrees turned.
Odd layer Even layer Overlap
2. Stacking pattern is bilateral symmetry, even layer will be 90 degrees turned.
Odd layer Even layer Overlap
4-10