Station & Pallet Setup; Station Conveyor Position - Okura Yusoki A Series Manual

12. Station & Pallet setup
A correct password is to be entered to protect important configuration data at
[Station location & pallet setup].
Click on [Conveyor position, pallet] button at main screen to open [Station & pallet
setup] screen.
12.1.

Station conveyor position

12.1.1. Registering station origin point
OXPA-QmV uses a single point on the station conveyor to help calculate step 2 which
is key value in determine the remaining steps. This point gives us the station origin.
Simply put, the position set for each station is the point on the conveyor where the
top of the roller plane intersects the point at the bottom, center of the fixed stop.
12-1