Create Custom Pattern - Okura Yusoki A Series Manual

13. Create custom pattern

On [Create Custom Pattern], the exact password has to be set to protect the data of
the inherent patterns.
Clicking on the button of [Create Custom Pattern] at main screen allows you to open
the screen.
Or on [Custom Pattern Selection], clicking on [Pattern add] at [Pattern selection]
allows you to open the same screen. However, you cannot edit the patterns on this
screen.
13.1. Create Custom Pattern
For how to create a custom pattern, let's have a example of 19 products in total
which consists of four 4-wheel-patterns and three more products.
13.1.1. Create sample pattern
The same below screen shows up as well when [Pattern add] at [Custom pattern
selection] is clicked on.
The screen is divided into such four areas and named Chartreuse area (A), Cyan grid
area (B) , Top area (C) and Bottom area (D). Those are respectively explained in
detail.
Top area (C)
Chartreuse area (A)
Bottom area (D)
Cyan grid area (B)
13-1