Okura Yusoki A Series Manual page 25

4.2.2. Name
You can give maximum 30 alphabet characters for program name. It is easy for you
to realize the program with given names.
4.2.3. Product dimension
Enter product Length (L), Width (W) and Height (H) in millimeters (mm). You can
st
enter up to the 1
the direction of flow at station conveyor. Please see following figure.
Note: Length L in the case of turning
When products may or may not be turned at the station conveyor (turning
selected at pattern creation) the length is in the direction of flow before
turning. When the products are always turned at the station (turning
selected in the default menu) the length is in the direction of flow after
turning.
Width W
Length L
Handled article dimensions
4.2.4. Station, Pallet, End-effector
Specify Nos. out of stations, pallets and end effectors registered.
decimal place of the Height (H). Product Length is measured in
Station conveyor
Height H
4-5