Extended Axis Position Data - Okura Yusoki A Series Manual

6.9.

Extended axis position data

Position data of extended axis can be edited. Click on each item to edit them. You
can cancel by ESC key what you edited.
Step add
Last step delete
Axis change
Row add
Row delete
OK
Cancel
Caution:
Step 1 – 3 are calculated by OXPA-QmV. Step. Step 1 is close position, 2 is
jog open and 3 is fully opened. See [Installation and Service manual
(Electrical) for detail.
:Add steps of C axis
:Delete last step of C axis
:Change axis out of multi-extended axes
:Add row of extended axis
:Delete the last row
:Make changes effective then close screen
:Make changes ineffective then close screen
6-33