10.3.
Maximum load size
Enter the maximum load width at the "Front view" field, when viewing the stack from
the pallet stop.
ENter the maximum load width at the "Right side view" field, when viewing the stack
from the right side of pallet stop.
If there is a load size limit including pallet height, enter max load size including pallet
height into [Height including pallet] box. If there is no such limit, enter [0].
10.4.
Overhang ratio
The overhang ratio numbers determine the amount of acceptable distance that a
product is allowed to overhang the edge of the pallet without being unstable.
For big box: the number represents the fraction that the box can overhang. For
example, if the value is 3, then 1/3 of the box is allowed to overhang the pallet.
For small box: the number represents the fraction that the box can overhang. For
example, if the value is 6, then 1/6 of the box is allowed to overhang the pallet.
The big and small limit determines the size which a box is small or big. If the value is
400mm, then any product larger than 400mm will be classified as big.
10-3