Overlap Setting - Okura Yusoki A Series Manual

4.6.

Overlap setting

4.6.1. Bag overlap:
The bag overlap is used only for the bag stacking. The pattern matched to the
external size (shown in the below figure on how to specify) can be made.
Horizontal direction is PW, and the vertical direction is PL.
Pallet
Dimension of PW
Dimension of PW side
When "Surface united overlap" option is selected, it is not possible to use it together
with options other than "With product repeated" group box. The stacking pattern
automatically made can be fine-tuned in the expansion display.
Note: Fine-tune
The positional data adjustment in the expansion display is called
"Fine-tune". Even when the option with the product is not used repeatedly,
the stacking pattern of palletizing can be fine-tuned. Please refer to the
paragraph of the expansion display for the function and the content of
fine-tuning. Fine-tuning doesn't correspond to De - palletizing
Overhang setting on PL side
Dimension of PL side
Overhang setting on PL side
A stacking pattern size
when stowing it repeatedly
is an area including
the overhang.
The overhang setting is
specified in the "Surface united
overlap" group box.
4-14