Okura Yusoki A Series Manual page 161

Click on "OK" to open the next "Designate the comment file for sequence program".
Click on "Open" after comment file chosen.
This function is setting the store allocation for sequence program.
1. Select the command from menu bar-[Utilities]-[Comment designate]. Just after
the crate robot program, comment file allocation does not set.
2. Comment file allocation screen displayed.
3. Enter the file allocation into "File allocation" field and file name into "File name"
field.
When comment for sequence file is setup, you can display or printout the sequence
program's data memory and rely with comment at section 4.2.3. [Editing Program
parameter] and section 7.2.4. [Print out].
If command for sequence file does not setup you can not add the comment into
sequence program's data memory and relay.
Make the Comment for sequence file for each Robot.
Comment file for sequence file saved as [Project.cmt] and different folder from
OXPA-QmV.
10-21