Parameterization Tools; Overview; Table 31 Overview Of Parameterization Tools; Table 32 Parameterization Overview - WAGO 765-4203/0100-0000 Product Manual

765-4203/0100-0000

5.5 Parameterization Tools

5.5.1 Overview

There are several ways to set the product's parameters. The following table provides an
overview of the tools.
Tool
Controller with EtherCAT
Master
WAGO I/O Field Web-
server
WAGO I/O Field App
WAGO IO-Link Configura-
tor
Three domains are distinguished for configuration and parameterization:
1. The EtherCAT configuration: select EtherCAT
2. The port configuration: IO-Link master (and the amount of IO-Link process data: 1,
2, 4, 8, 16, or 32 bytes), digital input or output.
3. 3: The IO-Link device configuration
The following table shows which tool can influence which section.
Tool
EtherCAT
WAGO I/O Field Web-
server
Product manual | Version: 1.0.0
4PORT IOL-A FLD EC DC 24V 2.0A
Description
®
The EtherCAT master must be configured to exchange process data with the 765
Series modules.
The WAGO_series765.xml and WAGO_series765_diag.xml device description
files contain the WAGO I/O System Field modules. The configuration software of
the EtherCAT
eterize a module (or multiple modules) of the 765 Series.
For each of ports X01, X02, ..., the user specifies in the configuration how much
process data the connected IO-Link device transfers, or whether a digital input or
output is connected to the port. The user loads the configuration onto the Ether-
®
CAT master. The EtherCAT
modules via EtherCAT
The WAGO I/O Field Webserver is a Webserver that is integrated into the 765
Series module. Using a Web browser, the user can view the Web pages and dis-
play and modify parameters.
The WAGO I/O Field app is an app for mobile devices that can communicate with
a 765 module via Bluetooth
master and the connected IO-Link devices, read and write process data and dis-
play diagnostics.
WAGO IO-Link Configurator is software for configuring the WAGO IO-Link mas-
ter and the IO-Link devices.
®
EtherCAT Module
®
Master The EtherCAT
configures the 765 Series
module.
–
Table 31: Overview of Parameterization Tools
®
master imports these XML files, and the user can select and param-
®
master configures and parameterizes the 765 Series
®
.
®
. With the app, the user can parameterize the IO-Link
®
module
Port Configuration
® ®
master The EtherCAT master
sets the parameter se-
lected by the user on the
basis of the parameters in
the XML file WAGO_se-
ries765.xml. For each
port, the configuration de-
termines whether the port
is used as an IO-Link mas-
ter, a digital input or a digi-
tal output (or is disabled).
Yes
Functions
Table 32: Parameterization Overview
IO-Link Device Configu-
ration
-
Input fields to read/write
index;
31