WAGO 765-4203/0100-0000 Product Manual page 79

765-4203/0100-0000
1. On the IOL tab, enter the index of the connected IO-Link device you want to access
into the Index field as a hexadecimal value.
2. On the IOL tab, enter the subindex of the connected IO-Link device you want to ac-
cess into the Subindex field as a hexadecimal value; the default setting is 00
3. On the IOL tab, enter the data to write in the Input data field.
4. Click the [Write] button.
ð The write operation is performed.
If the operation was successful, the text Write ok: and the result appear in the history.
The entries in the history then have the following structure:
Time – Index:Subindex – Write ok: <Result>
If the operation was not successful, an error message appears in the history with error
codes from the IO-Link master and IO-Link device. The entries in the history then have
the following structure:
Time – Index:Subindex – Write failed: IOLMErrorCode(<error code of
the IO-Link master>): IOLDErrorCode(<error code of the IO-Link de-
vice>)
Deleting the Read and Write Access History
To delete the logged history of read and write operations:
• Click the [Clear history] button.
ð The history of read and write access operations is deleted.
Product manual | Version: 1.0.0
4PORT IOL-A FLD EC DC 24V 2.0A
Commissioning
79