Pos : 3 /Alle Serien (Allgemeine M odul e)/Rec htlic hes, Allgemei nes/Impressum für Standardhandbüc her - allg. Angaben, Ansc hriften, T elefonnummer n und E-Mail-Adres sen @ 3\mod_1219151118203_21.doc x @ 21060 @ @ 1
2ai 4-20ma hart ex i 2-channel analog input; hart; intrinsically safe, 2ai 4-20ma hart ne43 ex i 2-channel analog input; hart; namur ne43; intrinsically safe (100 pages)
I/o system 8ai; tc; adjust 8-channel analog input; thermocouple; adjustable (96 pages)
Summary of Contents for WAGO 750-481/003-000
Page 1
WAGO-I/O-SYSTEM 750 Pos : 2 /D okumentati on allgemein/Ei nband/Ei nband H andbuch - Fronts eite 2015 - mit Doc Variabl en (Standar d) @ 9\mod_1285229289866_0.doc x @ 64941 @ @ 1 Manual 750-481/003-000 2AI RTD Ex i 2-Channel Analog Input Module for Resistance Sensors, Ex i V 1.4.0...
Page 2
We wish to point out that the software and hardware terms as well as the trademarks of companies used and/or mentioned in the present manual are generally protected by trademark or patent. WAGO is a registered trademark of WAGO Verwaltungsgesellschaft mbH. === Ende der Liste für T extmar ke Ei nband_vorne === Manual...
2.1.1 Subject to Changes ................9 2.1.2 Personnel Qualifications ............... 9 2.1.3 Use of the WAGO-I/O-SYSTEM 750 in Compliance with Underlying Provisions ................9 2.1.4 Technical Condition of Specified Devices ......... 10 Safety Advice (Precautions) ..............11 Device Description ..................13 View ......................
Page 4
Table of Contents WAGO-I/O-SYSTEM 750 750-481/003-000 2AI RTD Ex i ® Connecting a Conductor to the CAGE CLAMP ........38 Power Supply Concept ................39 6.2.1 Power Supply Concept in Marine Applications ......... 41 Connection Examples ................42 6.3.1 2 x RTD, 2-Conductors ..............43 6.3.2...
(2AI RTD Ex i). Pos : 11 /Serie 750 ( WAGO-I/O-SYST EM)/Hi nweis e z ur D okumentati on/Hi nweise/Ac htung: Hinweis z ur D okumentati on I/O-Modul e 750- xxxx @ 4\mod_1237986979656_21.doc x @ 29023 @ @ 1 The I/O module 750-481/003-000 shall only be installed and operated according to the instructions in this manual and in the manual for the used fieldbus coupler/controller.
Notes about this Documentation WAGO-I/O-SYSTEM 750 750-481/003-000 2AI RTD Ex i Pos : 12.4 /All e Seri en ( Allgemei ne Module)/Ü bers chriften/Ebene 2/Symbol e - Ü berschrift 2 @ 13\mod_1351068042408_21.doc x @ 105270 @ 2 @ 1 Symbols Pos : 12.5.1 /All e Serien ( Allgemei ne Module)/Sicherheits- und sons tige Hi nweis e/Gefahr/Gefahr: _War nung vor Pers onenschäden allgemei n_ - Erläuter ung @ 13\mod_1343309450020_21.doc x @ 101029 @ @ 1...
Page 7
WAGO-I/O-SYSTEM 750 Notes about this Documentation 750-481/003-000 2AI RTD Ex i Additional Information: Refers to additional information which is not an integral part of this documentation (e.g., the Internet). Pos : 12.6 /Dokumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1 Manual V 1.4.0 HW-Version 07, SW-Version 41...
WAGO-I/O-SYSTEM 750 750-481/003-000 2AI RTD Ex i Pos : 12.7 /All e Seri en ( Allgemei ne Module)/Ü bers chriften/Ebene 2/D arstellung der Z ahlens ys teme - Ü bers chrift 2 @ 23\mod_1435647128078_21.doc x @ 184811 @ 2 @ 1 Number Notation Pos : 12.8 /All e Seri en ( Allgemei ne Module)/R ec htliches , Allgemei nes /Zahlens ysteme @ 3\mod_1221059454015_21.doc x @ 21711 @ @ 1...
Please send your request for modified and new hardware or software configurations directly to WAGO Kontakttechnik GmbH & Co. KG. Pos : 15.7 /Dokumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1 Manual V 1.4.0 HW-Version 07, SW-Version 41...
Pos : 15.10.2 /Serie 750 ( WAGO-I/O- SYST EM)/Wic htig e Erl äuter ung en/Sic her hei ts- und s onstige Hi nweise/Gefahr/Gefahr: Ei nbau 0750- xxxx nur i n Gehäus en, Sc hränken oder el ektrisc hen Betriebsräumen! @ 6\mod_1260180556692_21.doc...
Page 12
Important Notes WAGO-I/O-SYSTEM 750 750-481/003-000 2AI RTD Ex i Do not use any contact spray! Do not use any contact spray. The spray may impair contact area functionality in connection with contamination. Pos : 15.11.5 /Alle Serien (Allgemeine M odul e)/Sic herheits- und s onstige Hinweise/Achtung/Ac htung: Ver pol ung en der D aten- und Versorgungsleitungen vermeiden! @ 6\mod_1260184045744_21.doc x @ 46767 @ @ 1...
Pos : 18.1.4 /Serie 750 (WAGO-I/O-SYST EM)/Wichtige Erläuterungen/Sic herheits- und sonstige Hinweis e/War nung/Warnung: Ex i Installati on des WAGO-I/O-SYST EM 750 nur in Zone 2 oder i m nicht-ex- Ber eich @ 5\mod_1245851655116_21.doc x @ 35947 @ @ 1...
Page 14
The field voltage and the system voltage are electrically isolated from each other. Pos : 18.1.17 /Serie 750 ( WAGO-I/O- SYST EM)/Gerätebeschr eibung/Einl eitung/Einsatzbereic h/Einsatzbereic h 750- xxxx alle Koppler/C ontroll er ohne Ec onomy- Koppler @ 3\mod_1232541867468_21.doc x @ 26525 @ @ 1...
Figure 2: Data Contacts Pos : 18.9.2 /Serie 750 (WAGO-I/O-SYST EM)/Wichtige Erläuterungen/Sic herheits- und sonstige Hinweis e/Achtung/Achtung: Bus kl emmen nic ht auf Gol dfeder kontakte leg en! @ 7\mod_1266318463636_21.doc x @ 50695 @ @ 1 Do not place the I/O modules on the gold spring contacts!
Pos : 18.12.1 /Serie 750 ( WAGO-I/O- SYST EM)/Wic htig e Erl äuter ung en/Sic her hei ts- und s onstige Hi nweise/Vorsicht/Vorsic ht: Verletzungsgefahr durc h sc har fkantige Mes ser kontakte! @ 6\mod_1256193279401_21.doc...
Connection Type Pos : 18.27.2 /Serie 750 ( WAGO-I/O- SYST EM)/Gerätebeschr eibung/Tec hnische D aten/Ansc hl usstec hni k/Technisc he Daten Ver drahtungs ebene CC - 0,08 bis 2,5mm2 @ 17\mod_1380121238809_21.doc x @ 132780 @ @ 1 Table 12: Technical Data – Field Wiring ®...
Pos : 18.28 /Serie 750 ( WAGO-I/O-SYST EM)/Gerätebeschr eibung/Tec hnische D aten/Klimatisc he U mgebungsbeding ungen/T ec hnische D aten Kli mat. U mgebungsbed. ohne erw. T emp. 0...55°C/- 25...+ 85°C @ 5\mod_1247657968368_21.doc x @ 37603 @ 3 @ 1...
750 > System Description. Pos : 18.32 /Serie 750 ( WAGO-I/O-SYST EM)/Gerätebeschr eibung/Zul ass ung en/Allgemein/Zul ass ung en Bus klemme 750- xxxx Allgemei n, ohne Vari antenangabe - Einlei tung @ 4\mod_1237460656921_21.doc x @ 28643 @ @ 1 The following approvals have been granted to 750-481/003-000 I/O modules: Pos : 18.33 /Alle Serien (Allgemeine M odul e)/Z ulass ungen/Standar dz ulass ungen/CE (Konfor mitäts kennzeic hnung) @ 3\mod_1224494777421_21.doc x @ 24276 @ @ 1...
Standards and Guidelines Pos : 18.46 /Serie 750 ( WAGO-I/O-SYST EM)/Gerätebeschr eibung/Nor men und Richtlinien/N or men und Richtlinien I/O-M odul 750- xxxx, ohne Vari antenangabe - Einl eitung @ 7\mod_1274278887584_21.doc x @ 56645 @ @ 1 750-481/003-000 I/O modules meet the following standards and guidelines: Pos : 18.47 /Alle Serien (Allgemeine M odul e)/Nor men und Ric htlini en/Ex(i)-Nor men/AT EX-Ric htli nie 2014/34/EU @ 19\mod_1404197489184_21.doc x @ 157133 @ @ 1...
Page 27
WAGO-I/O-SYSTEM 750 Device Description 750-481/003-000 2AI RTD Ex i Explosive atmosphere EN 60079-31 Equipment dust ignition protection by enclosure “t” Pos : 18.53 /Alle Serien (Allgemeine M odul e)/Nor men und Ric htlini en/Ex(i)-Nor men/Explosionsfähige Atmosphär e IEC 60079-0 @ 15\mod_1368541723872_21.doc x @ 119704 @ @ 1...
Page 28
Device Description WAGO-I/O-SYSTEM 750 750-481/003-000 2AI RTD Ex i EU EMC Directive 2014/30/EU Pos : 18.67 /Alle Serien (Allgemeine M odul e)/Nor men und Ric htlini en/EM V-Nor men - Standard/EM V C E-Störfestig keit EN 61000-6- 2 @ 4\mod_1242797655625_21.doc x @ 33591 @ @ 1...
Process Image Pos : 21 /Serie 750 ( WAGO-I/O-SYST EM)/Proz ess abbild Kl emmenbus /Hinweis: Prozes sabbildmapping abhängig von FBK/PFC, ohne Status-/C ontr olbyte @ 6\mod_1256126797251_21.doc x @ 43340 @ @ 1 Mapping of process data in the process image of fieldbus systems The representation of the process data of some I/O modules or their variants in the process image depends on the fieldbus coupler/controller used.
Process Image WAGO-I/O-SYSTEM 750 750-481/003-000 2AI RTD Ex i Table 16: Process Image Configuration for Pt100, Pt200, Pt500 and Pt1000 Status- Numerical value* Temperature byte Error °C hex. AI 1, 2 binary hex. dec. <-200.0 '1000.0000.0000.0001' 0x8001 -32767 0x41 -200.0 '1111.1000.0011.0000'...
WAGO-I/O-SYSTEM 750 Process Image 750-481/003-000 2AI RTD Ex i Configuration for Ni Resistance Sensors To evaluate the nickel resistance sensors, the measured values of the resistance are converted and sent as temperature values. All temperature values are represented in a standard numeric format. The possible numerical range matches the defined temperature range of the Ni sensors from -60 °C to +250 °C or from -...
Process Image WAGO-I/O-SYSTEM 750 750-481/003-000 2AI RTD Ex i Table 18: Process Image Configuration for Ni 120 Status- Numerical value Temperature byte Error °C hex. AI 1,2 binary hex. dec. <-80.0 '1000.0000.0000.0001' 0x8001 -32767 0x41 -80.0 '1111.1100.1110.0000' 0xFCE0 -800 0x00 -50.0...
WAGO-I/O-SYSTEM 750 Process Image 750-481/003-000 2AI RTD Ex i Configuration for Resistance Measuring Resistance measuring is only possible using 2-wire devices. The measured values are sent out directly when measuring the resistance. In the measuring range from 10 Ω to 1.2 kΩ, the resolution is 1 digit per 0.1 Ω.
Process Image WAGO-I/O-SYSTEM 750 750-481/003-000 2AI RTD Ex i Configuration for Potentiometer Measuring Potentiometer measuring is only possible using 3-wire devices. When a potentiometer is used for measurement, the relative position of the connected potentiometer is expressed in percent: Slider...
I/O modules with fewer power contacts. Pos : 26.2 /Serie 750 (WAGO-I/O-SYST EM)/Wic htige Erläuterungen/Sicherheits- und sonstig e Hinweis e/Vorsic ht/Vorsicht: Verl etz ungsgefahr durc h s charfkantige M ess er kontakte! @ 6\mod_1256193279401_21.doc x @ 43414 @ @ 1 Risk of injury due to sharp-edged blade contacts! The blade contacts are sharp-edged.
Working on energized devices can damage them. Therefore, turn off the power supply before working on the devices. Pos : 26.8 /Serie 750 (WAGO-I/O-SYST EM)/M ontieren/D emontieren/I/O-Modul einfüg en @ 3\mod_1231769726703_21.doc x @ 25989 @ 3 @ 1 5.2.1 Inserting the I/O Module...
WAGO-I/O-SYSTEM 750 Mounting 750-481/003-000 2AI RTD Ex i Pos : 26.10 /Serie 750 ( WAGO-I/O-SYST EM)/Monti eren/D emonti eren/I/O-M odul entfer nen @ 4\mod_1239169375203_21.doc x @ 30334 @ 3 @ 1 5.2.2 Removing the I/O Module Remove the I/O module from the assembly by pulling the release tab.
Connect Devices Pos : 29 /Serie 750 ( WAGO-I/O-SYST EM)/Ans chli eßen/Leiter an C AGE C LAM P ans chli eßen ( allgemei n) - Übersc hrift 2 und Text @ 3\mod_1225448660171_21.doc x @ 24928 @ 2 @ 1 ®...
Pos : 32.3 /Serie 750 (WAGO-I/O-SYST EM)/Wic htige Erläuterungen/Sicherheits- und sonstig e Hinweis e/Hinweis/Hi nweis: M axi mal er Strom Ex i Ei ns peis ung 750- 06xx 1,0 A @ 7\mod_1274358256668_21.doc x @ 56898 @ @ 1...
WAGO-I/O-SYSTEM 750 Connect Devices 750-481/003-000 2AI RTD Ex i 6.3.1 2 x RTD, 2-Conductors Figure 15: Example Connection 2 x RTD, 2-wire 6.3.2 2 x RTD, 3-Conductors Figure 16: Example Connection 2 x RTD, 3-wire Manual V 1.4.0 HW-Version 07, SW-Version 41...
Use in Hazardous Environments Pos : 36.2 /Serie 750 (WAGO-I/O-SYST EM)/Eins atz in Ex- Ber eichen/Ei ns atz ber eich Serie 750 @ 3\mod_1234272230203_21.doc x @ 27500 @ @ 1 The WAGO-I/O-SYSTEM 750 (electrical equipment) is designed for use in Zone 2 hazardous areas.
Marking for Europe According to ATEX and IECEx Pos : 36.6 /Serie 750 (WAGO-I/O-SYST EM)/Eins atz in Ex- Ber eichen/Beis piel bedruc kung ATEX und IEC Ex_TUEV07_2017 @ 14\mod_1360569228625_21.doc x @ 111294 @ @ 1 Figure 19: Marking Example According to ATEX and IECEx Figure 20: Text Detail –...
WAGO-I/O-SYSTEM 750 Use in Hazardous Environments 750-481/003-000 2AI RTD Ex i Table 25: Description of Marking Example According to ATEX and IECEx Marking Description TUEV 07 ATEX 554086 X Approving authority resp. certificate numbers IECEx TUN 09.0001 X Dust Equipment group: All except mining...
750-481/003-000 2AI RTD Ex i Pos : 36.8 /Serie 750 (WAGO-I/O-SYST EM)/Eins atz in Ex- Ber eichen/Beis piel bedruc kung ATEX und IEC Ex_TUEV12_Ex i_2017 @ 14\mod_1360569320118_21.doc x @ 111298 @ @ 1 Figure 21: Marking Example for Approved Ex i I/O Module According to ATEX and IECEx Figure 22: Text Detail –...
WAGO-I/O-SYSTEM 750 Use in Hazardous Environments 750-481/003-000 2AI RTD Ex i Table 26: Description of Marking Example for Approved Ex i I/O Module According to ATEX and IECEx Marking Description TUEV 12 ATEX 106032 X Approving authority resp. certificate numbers...
Figure 23: Marking Example According to NEC Pos : 36.11 /Serie 750 ( WAGO-I/O-SYST EM)/Ei ns atz i n Ex-Bereic hen/Beispi elbedruc kung und Textdetail N EC 500_2017 @ 14\mod_1360580302684_21.doc x @ 111353 @ @ 1 Figure 24: Text Detail – Marking Example According to NEC 500...
750-481/003-000 2AI RTD Ex i Pos : 36.13 /Serie 750 ( WAGO-I/O-SYST EM)/Ei ns atz i n Ex-Bereic hen/Beispi elbedruc kung und Textdetail N EC 505_2017 @ 29\mod_1497865583500_21.doc x @ 424739 @ @ 1 Figure 25: Text Detail – Marking Example for Approved Ex i I/O Module According to NEC 505...
750-481/003-000 2AI RTD Ex i Pos : 36.16 /Serie 750 ( WAGO-I/O-SYST EM)/Ei ns atz i n Ex-Bereic hen/Beispi elbedruc kung und Textdetail C EC_2017 @ 29\mod_1497865583297_21.doc x @ 424736 @ @ 1 Figure 27: Text Detail – Marking Example for Approved Ex i I/O Modules According to CEC 18...
Special Notes Regarding Explosion Protection Pos : 36.21.2 /Serie 750 ( WAGO-I/O- SYST EM)/Ei nsatz i n Ex-Bereic hen/Besonder e Hi nweis e hinsic htlic h Explosi onssc hutz_2017 @ 29\mod_1491556994025_21.doc x @ 415448 @ @ 1 The following warning notices are to be posted in the immediately proximity of the WAGO-I/O-SYSTEM 750 (hereinafter “product”):...
Page 54
Use in Hazardous Environments WAGO-I/O-SYSTEM 750 750-481/003-000 2AI RTD Ex i Explosive atmosphere occurring simultaneously with assembly, installation or repair work must be ruled out. Among other things, these include the following activities • Insertion and removal of components •...
Special Notes Regarding ANSI/ISA Ex Pos : 36.21.5 /Serie 750 ( WAGO-I/O- SYST EM)/Ei nsatz i n Ex-Bereic hen/AN SI/ISA gemäß U L Fil e E198726_2017 @ 29\mod_1491557259544_21.doc x @ 415451 @ @ 1 For ANSI/ISA Ex acc. to UL File E198726, the following additional requirements apply: •...
File with PROFIBUS DP and PROFINET IO Pos : 40 /Serie 750 ( WAGO-I/O-SYST EM)/In Betrieb nehmen/Parametrier en über GSD-Datei/Hi nweis : Vor aus setzung GSD Par ametrierung Versi on Koppl er/Contr oller 750-04xx @ 28\mod_1486470618507_21.doc x @ 405368 @ @ 1...
WAGO-I/O-SYSTEM 750 Appendix 750-481/003-000 2AI RTD Ex i 8.1.1.2 PROFINET IO Fieldbus Couplers 750-375(/025-000), 750-377(/025-000) When using the aforementioned PROFINET IO fieldbus couplers, the process image size is configured by selecting the corresponding GSD entry. Table 32: PROFINET IO Configuration...
8.1.2.1 All PROFIBUS DP and PROFINET IO Fieldbus Couplers/Controllers The following assignment applies to the parameters of the I/O module when using PROFIBUS DP and PROFINET IO fieldbus devices. Table 33: Specific Module/Channel Parameters for 750-481/003-000 Parameter Value WAGO GSD File...
Page 59
WAGO-I/O-SYSTEM 750 Appendix 750-481/003-000 2AI RTD Ex i Table 33: Specific Module/Channel Parameters for 750-481/003-000 Parameter Value WAGO GSD File I/O-CHECK PB-DP PN-IO 50 Hz, 320 ms 60 Hz, 270 ms 100 Hz, 160 ms 200 Hz, 80 ms 400 Hz, 40 ms...
Appendix WAGO-I/O-SYSTEM 750 750-481/003-000 2AI RTD Ex i 8.1.2.2 PROFIBUS DP Fieldbus Couplers/Controllers 750-333(/0xx-000), 750-833(/0xx-000) The aforementioned fieldbus couplers/controllers allow channel- and module- specific behavior parameterization during diagnostics. Table 34: General Module/Channel Parameters Parameter Value Explanation Diagnostics The fieldbus coupler/controller signals a Channel x (x = 0 …...
WAGO-I/O-SYSTEM 750 Appendix 750-481/003-000 2AI RTD Ex i 8.1.2.3 PROFINET IO Fieldbus Couplers 750-375(/025-000), 750-377(/025-000) The aforementioned fieldbus couplers allow channel-specific behavior parameterization during diagnostics. Table 35: General Module/Channel Parameters Parameter Value Explanation Channel diagnostics 0 (false) An error on the respective signal channel does Channel x (x = 0 …...