Table 42 Calculation Of Port Cycle Time - WAGO 765-4203/0100-0000 Product Manual

Planning
Index Subindex Parametername
0x8000.20,
0x8010.20,
...
0x8000.21,
0x8010.21,
...
0x8000.22,
0x8010.22,
...
0x8000.23,
0x8010.23,
...
0x8000.24,
0x8010.24,
...
0x8000.25,
0x8010.25,
...
0x8000.26,
0x8010.26,
...
0x8000.27,
0x8010.27,
...
0x8000.28,
0x8010.28,
...
The "Port cycle time" parameter contains a factor (bits 0 to 5) and time basis (bits 6 and
7). The following table describes how the port cycle time is calculated from the factor and
the time basis.
Value Range
4 ... 63
48 Product manual | Version: 1.0.0
4PORT IOL-A FLD EC DC 24V 2.0A
Value Range
IO-Link port X01/ 0, 16, 17
X02/...
IO-Link Revision
IO-Link port X01/ 0
X02/...
Frame Capability
IO-Link port X01/ 0, 4 ... 191
X02/...
Cycle time
IO-Link port X01/ 0
X02/...
Offset Time
IO-Link port X01/ 0 ... 223
X02/...
Process Data Input
Length
IO-Link port X01/ 0 ... 223
X02/...
Process Data Out-
put Length
IO-Link port X01/ 0
X02/...
Compatible ID
IO-Link port X01/ 0
X02/...
Reserved
IO-Link port X01/ 0 ... 4, 36, 68
X02/...
Master Control
Time Basis (Bits Factor (Bits 0–5)
6+7)
0.1 ms (00) 4 ... 63
765-4203/0100-0000
Default Description
0 Check of the IO-Link version:
0: no check
16: checking whether the connected
IO-Link supports specification V1.0.
17: checking whether the connected
IO-Link supports specification V1.1.
0 Not supported: no function.
0 Port Cycle Time
0: calculated by IO-Link master
4 ... 191: see following table
0 Not supported: no function.
0 Length of the input data
Set automatically by the configuration
software. Please do not change.
0 Length of the output data
Set automatically by the configuration
software. Please do not change.
0 Not supported: no function.
0 Reserved
0 Bits 0 ... 4:
0: IO-Link port inactive.
1: Pin 4 is a digital input.
2: Pin 4 is a digital output.
3: IO-Link communication enabled
without compatibility check.
4: IO-Link is enabled if the connected
IO-Link device is compatible.
Bits 4 ... 15:
2: data storage enabled.
4: data storage disabled.
Table 42: Calculation of Port Cycle Time
Port Cycle Time Examples
(Formula)
0.1 ms * factor 4: 400 μs
16: 1.6 ms