Input Data Length; Vendor Id; Device Id; Displaying Process Data - WAGO 765-4203/0100-0000 Product Manual

Commissioning
Bits 6 ... 7
0
1
2
3

10.3.1.3.9 Input Data Length

This shows the actual input data length of the connected product in bytes.

10.3.1.3.10 Vendor ID

This value is the manufacturer ID of the connected product.

10.3.1.3.11 Device ID

This value is the device ID of the connected product.

10.3.1.3.12 Displaying Process Data

You can view the process data associated with a specific port on the Process Data tab.
Proceed as follows to view the process data for a port:
1. From the main menu of the Webserver (left), select the menu item which you want to
view information about.
2. Open the Process Data tab.
ð The Process Data tab opens. The current values of the process data configured for
input/output appear in hexadecimal format under Input/Output. If no process data has
been configured for a data direction (input or output), the corresponding field remains
empty.
72 Product manual | Version: 1.0.0
4PORT IOL-A FLD EC DC 24V 2.0A
Table 50: Cycle Time of the Master – Bits 6 ... 7
Calculation Formula
Multiplier × 0.1 ms
6.4 ms + multiplier × 0.4 ms
32.0 ms + multiplier × 1.6 ms
Reserved
Figure 16: Port XX Menu Item, Process Data Tab
765-4203/0100-0000