Table of Contents
Advertisement
765-4203/0100-0000
10.3.2 WAGO IO-Link Configurator
WAGO IO-Link masters can be used in various system environments. They can be either
gateways that link IO-Link to higher-level fieldbus or ETHERNET systems, modules in
modular remote I/O Systems or a fixed component of devices like controllers.
In most cases, a higher-level engineering tool is used in the relevant system environment.
Often, however, there is none or at least no uniform integration option. Various options
are implemented for the IO-Link device tool as easy-to-use solutions for the respective
cases.
The WAGO IO-Link Configurator software can be operated as a stand-alone program or
via WAGO I/O-CHECK.
You can find further information in the product manual WAGO IO-Link Configurator.
The manual is available in the download area for the WAGO IO-Link Configurator soft-
ware at ü www.wago.com, item number 0765-4203/0100-0000.
10.3.3 WAGO I/O Field app
10.3.3.1 Parameterizing a Module with the WAGO I/O Field App
Note
Read the online help!
You can find Product-specific information on the WAGO App I/O Field in the online help
for the app.
10.3.4 OPC UA Server
The device contains an OPC UA server. An OPC UA client can establish a connection
wot the device and access the following parameters, among others:
• Device identification
• Configuration parameters
• Process Data
• Measured values
• Diagnostic information
• Statistical information
The OPC UA client establishes a connection via the following URL:
opc.tcp://IP-address:4840
For IP-address, use the device's IP address.
The client can access device parameters anonymously (only read access) or with a user-
name/password (read/write access). The username and password are set with the Field
IO Webserver.
The following figure shows an excerpt from the device's information model.
Product manual | Version: 1.0.0
4PORT IOL-A FLD EC DC 24V 2.0A
Commissioning
93
Advertisement
Chapters
Table of Contents
