Advertisement
General Safety Summary
Read the following precautions carefully to avoid any personal
injuries, or damage to the instrument or products connected to it.
Use the instrument only as specified.
Use only the power cord supplied for the instrument.
Ground the instrument. The instrument is grounded through the
ground conductor of the power cord. To avoid electric shock,
always connect to grounded outlets. Make sure the instrument is
grounded correctly before connecting its input or output terminals.
Do not connect external signals. The BNC connector is used to
output the generated waveforms only. No external signals should
be connected to the BNC, or the instrument may be damaged.
Observe all terminal ratings and signs on the instrument to
avoid fire or electric shock. Before connecting to the instrument,
read the manual to understand the input/output ratings.
Do not operate with suspected failures. If you suspect that the
instrument is damaged, contact the Teledyne LeCroy service
department immediately.
Do not operate in wet/damp conditions.
Do not operate in an explosive atmosphere.
Keep the surface of the instrument clean and dry.
Avoid touching exposed circuits or wires. Do not touch
exposed contacts or components when the power is on.
Do not operate without covers. Do not operate the instrument
with covers or panels removed.
Use proper overvoltage protection.
Observe ventilation requirements. Ensure good ventilation.
Check the vent and fan regularly to prevent overheating.
1
Advertisement
