Regulatory And Safety; General Safety Considerations; Csa Safety Considerations - Teledyne VISION G2 CLASSIC 6 User Manual

Regulatory and Safety

Regulatory and Safety

General Safety Considerations

This equipment contains moving parts, which have the potential
to pinch or jam.
The installation category (overvoltage category) for this
instrument is Level II. The Level II category pertains to
equipment that receives its electrical power from a local level,
such as an electrical wall outlet.
This instrument must be connected to a grounded electrical
outlet.
Warning: Never work on the electrical components in the
system while there is power to the unit. Disconnect power
before servicing the instrument.
Review all safety and environmental precautions pertaining to
any chemicals that are to be used in conjunction with this
equipment.

CSA Safety Considerations

For indoor use only
Maximum altitude up to 2,000 meters
Environmental operating temperature 5 °C to 40 °C
Operating relative humidity 80% for temperatures up to 31 °C,
decreasing linearly to 50% relative humidity at 40 °C
Mains supply ratings 100-240 V~, 50-60 Hz, 1.5 A
Mains supply voltage fluctuations not to exceed ±10% of the
nominal voltage
Installation Category II (overvoltage categories)
Pollution Degree 2
See the installation section for lifting instructions.
Additional hazards may exist if the equipment is not used
correctly per the user guide.
Vision G2 Testers User Guide—74-108-800 Rev. H—12 June 2019 22 of 158