Table of Contents
Advertisement
AC Power Requirement
The power adapter operates with a single-phase, 100 to 240 Vrms (+/-10%) AC power
at 50/60 Hz (+/-5%).
Depending on the type and number of options and accessories (probes, PC port plug-
in, charging etc.), When powered by adapter, the product can consume up to 35 W of
power.
Use the power cord and adapter provided by the manufacturer. Use of other non-
designated products may cause personal injury.
General Care and Cleaning
Care
Do not store or leave the instrument in direct sunshine for extended periods of time. To
avoid damages to the instrument or probes, please do not expose them to fog, liquid, or
solvents.
Cleaning
Please perform the following steps to clean the instrument and probes regularly in
accordance with its operating conditions.
Disconnect the instrument from all power sources and then clean with a soft wet cloth.
Clean the loose dust on the outside of the instrument and probe with a soft cloth. When
cleaning the LCD, take care to avoid scratching it.
To avoid damage to the surface of the instrument and probe, please do not use any
corrosive liquid or chemical cleansers.
Make sure that the instrument is completely dry before restarting it to avoid potential
short circuits or personal injury.
12
T3DSOH1000/ISO User Manual
Advertisement
Table of Contents
