Table of Contents
Advertisement
Q&A
Troubleshooting
Try checking these items
If the problem persists,
Performing [Reset] in the [Setup] menu may resolve the issue (→204).
Also, see the Panasonic support site for the latest support information.
http://panasonic.jp/support/global/cs/dsc/
(This site is available in English only.)
■
Battery, power
The charging lamp blinks.
• Charging is being performed in a place with extremely high or low temperature.
→ Reconnect the USB connection cable (supplied) and retry charging in a place where ambient
temperature is 10 °C to 30 °C (50 °F to 86 °F) (temperature conditions also apply to the battery
itself).
• Charging is not possible if the power supply capacity of the computer is low.
Camera does not work even if the camera is turned on. Camera switches off as soon as the
camera is turned on.
• Battery needs recharging.
→ Charge the battery.
This unit is turned off automatically.
• [Economy] is activated.
The battery runs down quickly.
• [4K PHOTO] is set to [
→ When [
] ([4K Pre-Burst]) has been selected, the battery drains faster.
Select [
] ([4K Pre-Burst]) only when recording.
• The Wi-Fi connection has been on for a long time.
→ The battery is used up faster with a Wi-Fi connection. Turn off the camera as often as possible
using [Economy]
292
(→292 - 300)
(→19)
(→198)
] ([4K Pre-Burst]).
(→198)
or other methods.
first.
Others
Advertisement
Table of Contents
Need help?
Do you have a question about the Lumix DC-ZS200 and is the answer not in the manual?
Questions and answers
a take a photo with the dial set at P, push shutter and screen says "recording in Post focus" what does that mean? All I want is a single frame, not a movie.
On the Panasonic Lumix DC-ZS200, "recording in Post Focus" means the camera captures multiple images at different focus points when the shutter is pressed. You can then select and save the desired focus point later during playback. This feature is available when the mode dial is set to P (Program) and [Post Focus] is selected in the drive mode.
This answer is automatically generated