About the Card
The following SD standard-based cards can be used.
Type of Card
SD Memory Cards
SDHC Memory Cards
SDXC Memory Cards
■
About motion picture/4K photo recording and speed class ratings
Use a card that meets the following ratings of the SD Speed Class or UHS Speed Class.
• SD Speed Class and UHS Speed Class are the speed standards regarding continuous
writing. Confirm the SD speed by checking the card label or other card related
materials.
[Rec Format]
[AVCHD]
[MP4]
[MP4]
When recording in 4K Photo /
[Post Focus]
• Latest information:
http://panasonic.jp/support/global/cs/dsc/
(This site is available in English only.)
Access to the card
The access indication displays red when pictures are being recorded on the
card.
●
While the camera is accessing the card (for an operation such as picture writing, reading, deletion,
or formatting), do not turn off the camera or remove the battery, card, AC adaptor (optional) or DC
coupler (optional). Do not subject the camera to vibrations, impact, or static electricity. The card or
the data on the card may be damaged, and this unit may no longer operate normally. If operation
fails due to vibration, impact or static electricity, perform the operation again.
●
If you set the write-protect switch to "LOCK", you may not be able to write, delete
or format the data or display it by recording date.
●
It is recommended that you copy important pictures to your computer
(as electromagnetic waves, static electricity, or faults may cause data to be
damaged).
26
Capacity
512 MB – 2 GB • This unit is compatible with UHS-
4 GB – 32 GB
48 GB – 128 GB
[Rec Quality]
All
[FHD]/[HD]
[4K]/[High Speed Video]
standard SDHC/SDXC memory cards.
• Operation of the cards listed on the left has been
confirmed with Panasonic brand card.
Speed class
Class 4 or higher
UHS Speed Class 3
UHS Speed Class 3
Preparations
Notes
Ι
UHS Speed Class 3
Label example
6
Need help?
Do you have a question about the Lumix DC-ZS200 and is the answer not in the manual?
Questions and answers
a take a photo with the dial set at P, push shutter and screen says "recording in Post focus" what does that mean? All I want is a single frame, not a movie.
On the Panasonic Lumix DC-ZS200, "recording in Post Focus" means the camera captures multiple images at different focus points when the shutter is pressed. You can then select and save the desired focus point later during playback. This feature is available when the mode dial is set to P (Program) and [Post Focus] is selected in the drive mode.
This answer is automatically generated