Table of Contents
Advertisement
■
When selecting [
You can enlarge the screen to perform more precise settings of the focus position.
• You cannot set the focus position at the edges of the screen.
→
[Rec] /
Select [
] and press
Use
to set the focus position and press
[MENU/SET]
• The enlarged screen will appear for setting the focus position.
Move [+] to the focus position
Operation
—
—
[DISP.]
• The image of a part of the screen can be enlarged or reduced approximately 3 to 6 times. The
image of the entire screen can be enlarged or reduced approximately 3 to 10 times.
• It is also possible to record a picture by touching [
Press [MENU/SET]
93
Focus, Brightness (Exposure) and Color tone Settings
]
[Motion Picture] → [AF Mode]
Touch operation
Touch
Pinch out / Pinch in
—
[Reset]
Taking pictures with Auto Focus
Description
Moves [+].
Enlarges/reduces the screen in small steps.
Enlarges/reduces the screen in large steps.
Switches the enlarged display. (windowed/full
screen)
Returns to the screen of step
].
.
Advertisement
Table of Contents
Need help?
Do you have a question about the Lumix DC-ZS200 and is the answer not in the manual?
Questions and answers
a take a photo with the dial set at P, push shutter and screen says "recording in Post focus" what does that mean? All I want is a single frame, not a movie.
On the Panasonic Lumix DC-ZS200, "recording in Post Focus" means the camera captures multiple images at different focus points when the shutter is pressed. You can then select and save the desired focus point later during playback. This feature is available when the mode dial is set to P (Program) and [Post Focus] is selected in the drive mode.
This answer is automatically generated