Table of Contents
Advertisement
Stabilizer, Zoom and Flash
Correcting jitter
Recording mode:
Automatically detects and prevents jitter.
→
[Rec] /
Corrects vertical and horizontal jitter.
(Normal)
Corrects vertical jitter. This setting is ideal for panning (technique of recording a
subject by matching the camera movement with the movement of a subject going in
(Panning)
a specific direction).
[OFF]
[Stabilizer] does not work.
To prevent jitter
If a warning is displayed about jitter, use [Stabilizer], a tripod, or [Self Timer].
●
Using a slower shutter speed can cause motion blur. Shutter speed will be
slower particularly in the following cases. Keep the camera still from the
moment the shutter button is pressed until the picture appears on the screen.
We recommend using a tripod.
• [Slow Sync.]
• [Slow Sync./Red-Eye]
• [Clear Nightscape], [Cool Night Sky], [Warm Glowing Nightscape],
[Artistic Nightscape], [Glittering Illuminations], [Clear Night Portrait]
(Scene Guide Mode)
136
[Motion Picture] → [Stabilizer]
60
p
Advertisement
Table of Contents
Need help?
Do you have a question about the Lumix DC-ZS200 and is the answer not in the manual?
Questions and answers
a take a photo with the dial set at P, push shutter and screen says "recording in Post focus" what does that mean? All I want is a single frame, not a movie.
On the Panasonic Lumix DC-ZS200, "recording in Post Focus" means the camera captures multiple images at different focus points when the shutter is pressed. You can then select and save the desired focus point later during playback. This feature is available when the mode dial is set to P (Program) and [Post Focus] is selected in the drive mode.
This answer is automatically generated