Table of Contents
Advertisement
Playing Back and Editing Pictures
Viewing your pictures
1
Press [
2
Press
displayed
• When you press and hold
displayed one after another.
• Pictures can also be forwarded or rewound by rotating
the rear dial or dragging the screen horizontally.
• If you keep your finger touching the left or right edge of
the screen after scrolling the pictures, the pictures will
continue to be scrolled. (The pictures are displayed in
a reduced size.)
Sending pictures to the WEB services
If you press
while a single picture is being displayed, you can send the picture to the WEB service
quickly.
(→256)
■
Ending Playback
Press [
] (Playback) button again.
The Playback can also be ended by pressing the shutter button halfway.
●
The playback screen appears if the camera is turned on while pressing [
●
When [Lens Retraction] is set to [ON], the lens barrel is retracted after approx. 15 seconds as the
camera is switched to the playback screen from the recording screen.
●
This camera is compliant with the unified DCF (Design rule for Camera File system) standard
formulated by the Japan Electronics and Information Technology Industries Association (JEITA),
and with Exif (Exchangeable image file format). Files that are not DCF-compliant cannot be played
back.
●
It may not be possible to properly play back pictures taken using other cameras on this unit or it
may not be possible to use the functions of this unit for those pictures.
156
] (Playback) button
to select a picture to be
, the pictures are
] (Playback) button.
Advertisement
Table of Contents
Need help?
Do you have a question about the Lumix DC-ZS200 and is the answer not in the manual?
Questions and answers
a take a photo with the dial set at P, push shutter and screen says "recording in Post focus" what does that mean? All I want is a single frame, not a movie.
On the Panasonic Lumix DC-ZS200, "recording in Post Focus" means the camera captures multiple images at different focus points when the shutter is pressed. You can then select and save the desired focus point later during playback. This feature is available when the mode dial is set to P (Program) and [Post Focus] is selected in the drive mode.
This answer is automatically generated