Table of Contents
Advertisement
4
Select the AF area
Selected AF area
When selecting [
Change the shape of an AF area
Operation
[DISP.]
Press [MENU/SET]
When selecting [
Change the shape of an AF area
With cursor button operations
Use
(repeat)
• If you press [MENU/SET] again, the setting will be canceled.
• To cancel all the settings, press the [DISP.] button.
With touch screen operations
Touch the parts you want to set as AF areas
• If you touch one of the selected AF areas, the selection of the
area will be canceled.
Press [Fn2] button
■
Registering the set AF area in [
Press
on the screen of step
Use
to select the registration target icon and press [MENU/SET]
●
The settings adjusted in [
camera is turned off.
89
Focus, Brightness (Exposure) and Color tone Settings
] / [
] / [
Touch
operation
Touch
Moves position
Pinch out /
Changes the size (3 stages)
Pinch in
Resets the AF area back to
the center.
[Reset]
• If you press the button
again, the frame size will be
reset to the initial setting.
] / [
] / [
to select AF area and press [MENU/SET] to set
2
], [
] or [
]
Description
]
], [
] and [
] (Custom)
] will be restored to the default settings when the
Taking pictures with Auto Focus
Advertisement
Table of Contents
Need help?
Do you have a question about the Lumix DC-ZS200 and is the answer not in the manual?
Questions and answers
a take a photo with the dial set at P, push shutter and screen says "recording in Post focus" what does that mean? All I want is a single frame, not a movie.
On the Panasonic Lumix DC-ZS200, "recording in Post Focus" means the camera captures multiple images at different focus points when the shutter is pressed. You can then select and save the desired focus point later during playback. This feature is available when the mode dial is set to P (Program) and [Post Focus] is selected in the drive mode.
This answer is automatically generated