Table of Contents
Advertisement
●
No audio is recorded for motion pictures.
●
When a motion picture is recorded, the finished recording will be approximately 1/10th of the
actual recorded time period. (If you record a motion picture for 10 minutes, the resulting motion
picture recording time will be approximately 1 minute.) The recordable time displayed on the
camera is approx. 10 times of the actual recording time.
●
If you stop recording motion pictures too soon, the camera may continue recording until a certain
time.
■
Selecting the color to be retained ([One Point Color])
After touching [
Select the color to be retained with
[MENU/SET]
• You can also select it by touch operations.
• When you press [DISP.] button, the initial setting condition is
restored.
●
The selected color may not be retained for some subjects.
■
Setting the position and size of the light source ([Sunshine])
After touching [
Press
• The position of the light source can also be moved by touching the screen.
Rotate the rear dial to adjust the size of the light source
• On the touch screen, spread (pinch out) your 2 fingers to zoom in, and pinch (pinch in) your
2 fingers to zoom out.
• When you press [DISP.] button, the initial setting condition is restored.
Press [MENU/SET]
Tips on positioning the center of the light source
You can move the center of the light source to a point outside the image to obtain a more natural
finish.
75
Taking Pictures with different picture effects (Creative Control Mode)
], touch [
]
], touch [
]
to move the center of the light source to a different position
and press
Recording mode
Advertisement
Table of Contents
Need help?
Do you have a question about the Lumix DC-ZS200 and is the answer not in the manual?
Questions and answers
a take a photo with the dial set at P, push shutter and screen says "recording in Post focus" what does that mean? All I want is a single frame, not a movie.
On the Panasonic Lumix DC-ZS200, "recording in Post Focus" means the camera captures multiple images at different focus points when the shutter is pressed. You can then select and save the desired focus point later during playback. This feature is available when the mode dial is set to P (Program) and [Post Focus] is selected in the drive mode.
This answer is automatically generated