Table of Contents
Advertisement
●
Bars may appear at the sides or at the top and bottom of the screen, depending on the aspect
ratio setting.
●
Change the screen mode on your TV if the picture is displayed with the top or bottom cut off.
●
Check the [HDMI Mode (Play)].
●
To play back 24p motion pictures, set [HDMI Mode] to [AUTO]. Otherwise, the picture is not output
at 24 frames per second.
●
Pictures are not displayed on the camera screen. Also, sound is not produced from the camera's
speaker.
●
HDMI output will be canceled if a USB connection cable (supplied) is connected simultaneously.
●
Read the operating instructions for the TV.
The recorded pictures can be played back on a TV with an SD Memory Card
slot
●
Proper playback (aspect ratio) will be dependent on the TV used for viewing.
●
The file format of the motion pictures that can be played back differs depending on the TV model.
●
You may not be able to play back panorama pictures. Also you cannot perform automatic scrolling
playback of panorama pictures.
●
For cards compatible with playback, refer to the operating instructions of the TV.
271
(→201)
Connecting with other devices
Viewing on TV screen
Advertisement
Table of Contents
Need help?
Do you have a question about the Lumix DC-ZS200 and is the answer not in the manual?
Questions and answers
a take a photo with the dial set at P, push shutter and screen says "recording in Post focus" what does that mean? All I want is a single frame, not a movie.
On the Panasonic Lumix DC-ZS200, "recording in Post Focus" means the camera captures multiple images at different focus points when the shutter is pressed. You can then select and save the desired focus point later during playback. This feature is available when the mode dial is set to P (Program) and [Post Focus] is selected in the drive mode.
This answer is automatically generated