Table of Contents
Advertisement
4
Press the shutter button fully
• The recording starts automatically.
• During recording standby, the camera turns off automatically when no operation
is performed for a preset interval. The [Time Lapse Shot] recording will continue
even if the camera is turned off, and the camera is automatically turned on at the
recording start time. If you want to turn on the camera manually, press the shutter
button halfway.
• Operations during recording standby (The camera is turned on)
Operation
[Fn1]
*
2
When you record pictures by setting [Shooting Interval Setting] to [OFF], you can press
[Fn1] even while recording is in progress. After recording (exposure) of a picture taken at
the time when you pressed [Fn1] is finished, a selection screen is displayed.
*
3
When you record pictures by setting [Shooting Interval Setting] to [OFF], you cannot
perform touch operation.
5
Select the motion picture creation method
• [Rec Format]: [MP4]
[Rec Quality]
[Frame Rate]
[Sequence]
6
Press
• You can also create a motion picture using [Time Lapse Video] in the [Playback]
menu.
131
Taking pictures automatically at set intervals [Time Lapse Shot]
Touch operation
*
3
*
2
Sets the picture quality of the motion picture.
Set the number of frames per second. The higher the number is, the
smoother the motion picture will be.
[NORMAL]: Stitches the still pictures in the recording sequence.
[REVERSE]: Stitches the still pictures in the reverse order of recording.
to select [OK] and press [MENU/SET]
Displays a selection screen that lets you pause or stop
the recording
Displays a selection screen that lets you resume or stop
the recording (during pause)
4K Photo and Drive Settings
Description
Advertisement
Table of Contents
Need help?
Do you have a question about the Lumix DC-ZS200 and is the answer not in the manual?
Questions and answers
a take a photo with the dial set at P, push shutter and screen says "recording in Post focus" what does that mean? All I want is a single frame, not a movie.
On the Panasonic Lumix DC-ZS200, "recording in Post Focus" means the camera captures multiple images at different focus points when the shutter is pressed. You can then select and save the desired focus point later during playback. This feature is available when the mode dial is set to P (Program) and [Post Focus] is selected in the drive mode.
This answer is automatically generated