Table of Contents
Advertisement
■
Wi-Fi function
[Failed to connect wireless access point] / [Connection failed] / [No destination found]
• The wireless access point information set on this unit is wrong. Check the authentication type,
encryption type, and encryption key.
• Radio waves from other devices may block the connection to a wireless access point. Check other
devices that are connected to the wireless access point and devices that use the 2.4 GHz band.
[Connection failed. Please retry in a few minutes.] / [Network disconnected. Transfer stopped.]
• Radio waves from the wireless access point are getting weak. Perform the connection closer to the
wireless access point.
• Depending on the wireless access point, connection may be automatically disconnected after
specific time has passed. Reconnect the connection again.
[Connection failed]
• Change the access point to connect to in the smartphone Wi-Fi settings to this camera.
■
Others
[Some pictures cannot be deleted] / [This picture cannot be deleted]
• Non-DCF pictures
and then use [Format] on the camera.
[Cannot be set on this picture]
• [Title Edit], [Text Stamp], and other functions cannot be used for pictures that are not compliant with
the DCF standard (→156).
[A folder cannot be created]
• A folder cannot be created because available folder numbers have been already assigned.
Save all necessary pictures to your computer or other devices and format the card (→27).
After you format the card, execute [No.Reset] in the [Setup] menu to reset the folder number to
100.
(→204)
[Please turn camera off and then on again] / [System Error]
• Turn the camera on again. (Consult the dealer or your nearest Service Center if display still
remains.)
291
(→262)
(→156)
cannot be deleted. Save needed data on a computer or other device,
(→27)
Others
Message displays
Advertisement
Table of Contents
Need help?
Do you have a question about the Lumix DC-ZS200 and is the answer not in the manual?
Questions and answers
a take a photo with the dial set at P, push shutter and screen says "recording in Post focus" what does that mean? All I want is a single frame, not a movie.
On the Panasonic Lumix DC-ZS200, "recording in Post Focus" means the camera captures multiple images at different focus points when the shutter is pressed. You can then select and save the desired focus point later during playback. This feature is available when the mode dial is set to P (Program) and [Post Focus] is selected in the drive mode.
This answer is automatically generated