Table of Contents
Advertisement
4K Photo and Drive Settings
Recording with the 4K Photo function and selecting
pictures to save
Recording with the 4K Photo function
Recording mode:
You can take burst pictures of approximately 8 million pixels with a burst rate of 30 fps.
You can select and save a frame from the burst file.
• To record pictures, use a UHS Speed Class 3 card.
1
Press [
• The same operation can be performed by pressing
the [
icon, and pressing
2
Press
and press [MENU/SET]
• The recording method can also be set using
[4K PHOTO] in the [Rec] menu.
[4K Burst]
[4K Burst(S/S)]
"S/S" is an abbreviation
of "Start/Stop".
[4K Pre-Burst]
*
Audio is not played back when you perform playback with the camera.
107
] button
] button ( ), using
.
to select the recording method
For capturing the best shot of a fast-moving subject
(e.g., sports, aeroplanes, trains)
Audio recording: None
For capturing unpredictable photo opportunities
(e.g., plants, animals, children)
Audio recording: Available
For recording as needed whenever a photo opportunity arises
(e.g. the moment when a ball is thrown)
Audio recording: None
to select a 4K photo
*
Advertisement
Table of Contents
Need help?
Do you have a question about the Lumix DC-ZS200 and is the answer not in the manual?
Questions and answers
a take a photo with the dial set at P, push shutter and screen says "recording in Post focus" what does that mean? All I want is a single frame, not a movie.
On the Panasonic Lumix DC-ZS200, "recording in Post Focus" means the camera captures multiple images at different focus points when the shutter is pressed. You can then select and save the desired focus point later during playback. This feature is available when the mode dial is set to P (Program) and [Post Focus] is selected in the drive mode.
This answer is automatically generated