Table of Contents
Advertisement
3
Press
press [MENU/SET]
Item
Page
• You can switch to the next page by rotating the rear
dial.
With touch screen operations
Touch the menu item
• You can switch pages by touching
display.
4
Press
[MENU/SET]
Selected setting
Settings
• The setting methods vary depending on the menu
item.
With touch screen operations
Touch the setting to set
5
Press [Q.MENU/ ] button repeatedly
until the recording or playback screen
reappears
• During recording, the menu screen can also be exited
by pressing the shutter button halfway.
With touch screen operations
Touch [
]
●
You can display an explanation on the menu by pressing the
[DISP.] button while you select a menu item or setting.
●
The menu items that cannot be set are grayed out. In some
setting conditions, the reason the setting is disabled is
displayed when you press [MENU/SET] if you select a grayed-
out menu item.
44
to select the menu item and
to select the setting and press
on the right side of the
Basics
Setting the menu
Advertisement
Table of Contents
Need help?
Do you have a question about the Lumix DC-ZS200 and is the answer not in the manual?
Questions and answers
a take a photo with the dial set at P, push shutter and screen says "recording in Post focus" what does that mean? All I want is a single frame, not a movie.
On the Panasonic Lumix DC-ZS200, "recording in Post Focus" means the camera captures multiple images at different focus points when the shutter is pressed. You can then select and save the desired focus point later during playback. This feature is available when the mode dial is set to P (Program) and [Post Focus] is selected in the drive mode.
This answer is automatically generated