Table of Contents
Advertisement
[Monitor Display Speed] / [LVF Display Speed]
Sets the display speed of the monitor or viewfinder.
[ECO 30fps]
[60fps]
●
When [Monitor Display Speed] or [LVF Display Speed] (or both) is set to [ECO 30fps], Digital
Zoom is not available.
●
Cannot set to [ECO 30fps] in the following cases:
• Creative Video Mode
• When recording 4K photos
• When recording using [Post Focus]
●
[Monitor Display Speed] and [LVF Display Speed] are disabled while the HDMI output is being
used for recording.
●
The [Monitor Display Speed]/[LVF Display Speed] setting does not affect the recorded picture.
[Monitor Display] / [Viewfinder]
Adjust brightness and color of the monitor or viewfinder.
[Brightness]
[Contrast]
[Saturation]
[Red Tint]
[Blue Tint]
●
It will adjust the monitor when the monitor is in use, and the viewfinder when the viewfinder is in
use.
●
Some subjects may look different from their actual appearance, but the recorded picture will not
be affected.
199
Minimizes power consumption and the operating time is extended.
You can display a moving subject in fluid motion. This setting is ideal for recording
fast-moving subjects.
Adjusts the brightness.
Adjusts the contrast.
Adjusts the vividness of colors.
Adjusts red hues.
Adjusts blue hues.
Using Menu Functions
Menu list
→
[Setup]
Advertisement
Table of Contents
Need help?
Do you have a question about the Lumix DC-ZS200 and is the answer not in the manual?
Questions and answers
a take a photo with the dial set at P, push shutter and screen says "recording in Post focus" what does that mean? All I want is a single frame, not a movie.
On the Panasonic Lumix DC-ZS200, "recording in Post Focus" means the camera captures multiple images at different focus points when the shutter is pressed. You can then select and save the desired focus point later during playback. This feature is available when the mode dial is set to P (Program) and [Post Focus] is selected in the drive mode.
This answer is automatically generated