Table of Contents
Advertisement
■
Shutter speeds for each flash mode
Flash Mode
*
2
The shutter speed is set to 60 seconds in Shutter-Priority AE Mode. The shutter speed is set to T
(Time) in Manual Exposure Mode.
• In Intelligent Auto Mode ([
detected scene.
■
The available flash range
Edges of a picture may become slightly dark if using flash at short distances without using
zoom (close to max. Wide). This may be remedied by using a little zoom.
Approx. 0.6 m - 6.8 m (2.0 feet - 22 feet)
• These ranges are obtained, the ISO sensitivity is set to [AUTO], and [ISO Auto Upper
Limit (Photo)] is set to [AUTO].
●
Avoid doing the following, as the heat or light could cause deformation or discoloration.
• Putting the flash close to objects
• Covering the flash with your hand as it is firing
• Closing the flash as it is firing
●
Do not close the flash immediately after the preliminary flash is operated prior to taking pictures for
Forced ON/Red-Eye Reduction and other flash settings. If you close the flash immediately, it will
cause a malfunction.
●
Flash charging may take time if battery is low or if using flash repeatedly. When the flash is being
charged, the flash icon flashes red, and you cannot take a picture even when you fully press the
shutter button.
145
Shutter speed (seconds)
*
2
1/60
- 1/2000
] or [
Max. Wide
Flash Mode
]), the shutter speed changes depending on the
Approx. 1.0 m - 3.9 m (3.3 feet - 13 feet)
Stabilizer, Zoom and Flash
Taking pictures with flash
Shutter speed (seconds)
1 - 1/2000
Max. Tele
Advertisement
Table of Contents
Need help?
Do you have a question about the Lumix DC-ZS200 and is the answer not in the manual?
Questions and answers
a take a photo with the dial set at P, push shutter and screen says "recording in Post focus" what does that mean? All I want is a single frame, not a movie.
On the Panasonic Lumix DC-ZS200, "recording in Post Focus" means the camera captures multiple images at different focus points when the shutter is pressed. You can then select and save the desired focus point later during playback. This feature is available when the mode dial is set to P (Program) and [Post Focus] is selected in the drive mode.
This answer is automatically generated