Table of Contents
Advertisement
Creating stop motion animation
Recording mode:
You can stitch still pictures to create stop motion animation. The pictures are recorded as
a set of group pictures.
• Complete the date and time settings in advance.
1
Set the menu
→
[Auto Shooting]
[Shooting Interval]
2
Press
3
Press
[MENU/SET]
4
Press the shutter button halfway to focus
5
Press the shutter button fully
• Up to 9,999 frames can be recorded.
6
Move the subject to decide on the
composition
• Repeat the recording of still pictures in the same way.
• When you turn off the camera during recording, a message to restart recording
will appear when you turn on the camera.
How to create stop motion animation effectively
●
Up to two previously recorded pictures are displayed on the recording screen. Check this screen as
a guideline for determining the amount of required motion.
●
You can press [
unnecessary pictures. To return to the recording screen, press [
133
[Rec] → [Stop Motion Animation]
[ON]: Takes pictures automatically at a set recording interval.
[OFF]: Takes pictures manually, one frame at a time.
(Only when [Auto Shooting] is set to [ON])
Set the interval used for [Auto Shooting].
to select [Start] and press [MENU/SET]
to select [New] and press
] (Playback) button to check the recorded pictures. Press [
4K Photo and Drive Settings
[Stop Motion Animation]
(→29)
] button to delete
] (Playback) button again.
Advertisement
Table of Contents
Need help?
Do you have a question about the Lumix DC-ZS200 and is the answer not in the manual?
Questions and answers
a take a photo with the dial set at P, push shutter and screen says "recording in Post focus" what does that mean? All I want is a single frame, not a movie.
On the Panasonic Lumix DC-ZS200, "recording in Post Focus" means the camera captures multiple images at different focus points when the shutter is pressed. You can then select and save the desired focus point later during playback. This feature is available when the mode dial is set to P (Program) and [Post Focus] is selected in the drive mode.
This answer is automatically generated