Table of Contents
Advertisement
Recording while monitoring camera images
When using the HDMI output, you can take pictures while
monitoring the camera image on a TV, etc.
■
Switching the information displayed
You can change the display shown during HDMI output using [HDMI Info Display (Rec)]
in [TV Connection] on the [Setup] menu.
[ON]: The camera display is output as is.
[OFF]: Only images are output.
●
When using the Auto Focus Mode [
mode.
●
If you use the HDMI output during recording, the aspect ratio setting is fixed to [16:9].
●
An electronic sound or shutter sound will not sound.
●
If you set up a Wi-Fi connection while using the HDMI output, no image will be displayed on the
camera monitor.
●
Some of setting screens are not output through the HDMI connection.
●
This function is not available in the following cases:
• During motion picture recording
• During panorama picture recording
• When recording 4K photos
• When recording using [Post Focus]
272
] or MF assist, the screen cannot be enlarged in windowed
Connecting with other devices
Viewing on TV screen
Advertisement
Table of Contents
Need help?
Do you have a question about the Lumix DC-ZS200 and is the answer not in the manual?
Questions and answers
a take a photo with the dial set at P, push shutter and screen says "recording in Post focus" what does that mean? All I want is a single frame, not a movie.
On the Panasonic Lumix DC-ZS200, "recording in Post Focus" means the camera captures multiple images at different focus points when the shutter is pressed. You can then select and save the desired focus point later during playback. This feature is available when the mode dial is set to P (Program) and [Post Focus] is selected in the drive mode.
This answer is automatically generated