Table of Contents
Advertisement
Viewing on TV screen
Preparation
Turn off both camera and TV.
1
Connect camera to TV
Check the plug direction and insert it straight in. (If the cable is inserted in the wrong
direction, the plug could become deformed and cause faulty operation.) Also, do not
insert into the wrong socket. Doing so may cause damage to this unit.
HDMI micro cable
Use a "High Speed HDMI micro cable" with the HDMI logo.
Cables that do not comply with the HDMI standards will not work.
"High Speed HDMI micro cable" (Type D - Type A plug, up to 2 m (6.6 feet) long)
[HDMI] socket
To HDMI video/audio input socket
2
Turn on the TV and switch the TV input source to match the
connection socket
3
Turn on the camera and press [
270
Connecting with other devices
] (Playback) button
Advertisement
Table of Contents
Need help?
Do you have a question about the Lumix DC-ZS200 and is the answer not in the manual?
Questions and answers
a take a photo with the dial set at P, push shutter and screen says "recording in Post focus" what does that mean? All I want is a single frame, not a movie.
On the Panasonic Lumix DC-ZS200, "recording in Post Focus" means the camera captures multiple images at different focus points when the shutter is pressed. You can then select and save the desired focus point later during playback. This feature is available when the mode dial is set to P (Program) and [Post Focus] is selected in the drive mode.
This answer is automatically generated