Table of Contents
Advertisement
Cursor button / [MENU/SET] button (Selecting/setting items)
Pressing the cursor button:
Selection of items or setting of values etc., is performed.
Pressing [MENU/SET]:
Confirmation of setting contents, etc., is performed.
[DISP.] button (Switching the display information)
1
Press [DISP.] button to switch the display
During recording
You can switch the viewfinder/monitor display method.
→
[Custom] →
→ [LVF Disp. Set] or [Monitor Disp. Set]
[
] (viewfinder style)
[
] (monitor style)
■
[
] Live View Finder style display layout (Example of viewfinder style display)
With information
(Detailed information)
60
p
37
Buttons/Ring/Dials/Levers Used for Recording
[Monitor / Display] → [LVF/Monitor Disp. Set]
Scales down images slightly so that you can better review the
composition of the images.
Scales images to fill the entire screen so that you can see their details.
With information
With information
(Detailed information)
+
level gauge
60
p
Basics
With information
+
level gauge
Advertisement
Table of Contents
Need help?
Do you have a question about the Lumix DC-ZS200 and is the answer not in the manual?
Questions and answers
a take a photo with the dial set at P, push shutter and screen says "recording in Post focus" what does that mean? All I want is a single frame, not a movie.
On the Panasonic Lumix DC-ZS200, "recording in Post Focus" means the camera captures multiple images at different focus points when the shutter is pressed. You can then select and save the desired focus point later during playback. This feature is available when the mode dial is set to P (Program) and [Post Focus] is selected in the drive mode.
This answer is automatically generated