Table of Contents
Advertisement
●
You can take a picture even when Preview Mode is activated.
●
The range in which you can check the effect of a selected shutter speed is between 8 seconds
and 1/16000 seconds.
●
This mode cannot be used with [
Easily set aperture value / shutter speed for suitable exposure
(One Push AE)
Recording mode:
When the exposure setting is too bright or too dark, you can use one push AE to achieve
a suitable exposure setting.
How to tell if the exposure is not adequate
Blinks red
• If the aperture values and shutter speed blink red when the shutter
button is pressed halfway.
• If the Manual Exposure Assistance
[
] when in Manual Exposure Mode.
Preparations
• Assign [One Push AE] to the function button
1
(When exposure is not adequate) Press the function button
Change to appropriate exposure
●
In the following cases, suitable exposure cannot be set.
• When the subject is extremely dark and it is not possible to achieve adequate exposure by
changing the aperture value or shutter speed
• When recording using the flash
• Preview Mode
63
Taking pictures by setting the aperture value and shutter speed
] ([4K Pre-Burst]) of 4K Photo.
(→60)
is anything other than
(→47)
Recording mode
15
30
60
125
250
4.0
5.6
8.0
Advertisement
Table of Contents
Need help?
Do you have a question about the Lumix DC-ZS200 and is the answer not in the manual?
Questions and answers
a take a photo with the dial set at P, push shutter and screen says "recording in Post focus" what does that mean? All I want is a single frame, not a movie.
On the Panasonic Lumix DC-ZS200, "recording in Post Focus" means the camera captures multiple images at different focus points when the shutter is pressed. You can then select and save the desired focus point later during playback. This feature is available when the mode dial is set to P (Program) and [Post Focus] is selected in the drive mode.
This answer is automatically generated