[Center Marker] - Panasonic Lumix DC-ZS200 Owner's Manual

[Histogram]
Enabling/disabling the histogram display.
When set to [ON], you can move the display position of the histogram by pressing
• Direct touch operation is also possible from the recording screen.
Displays distribution of brightness in picture – e.g.
if the graph peaks at the right, this means there are
several bright areas in the picture. A peak in the center
represents correct brightness (correct exposure). This
can be used as a reference for exposure correction, etc.
●
When the histogram is not the same as that of the recorded picture under the following
conditions, histogram will be displayed in orange:
• During Exposure Compensation.
• When the flash fires.
• When the correct exposure is not achieved, such as when the lighting is low.
[Guide Line]
Sets the pattern of the guidelines to be displayed while recording.
●
When you select [
●
You can also set the position directly by touching [
●
The guideline is not displayed during panorama picture recording.

[Center Marker]

A cross [+] is displayed to indicate the center of the recording screen. This is useful for
zooming while keeping the subject at the center of the screen.
188
], you can move the position of the guideline by pressing
→ [Custom] →
] on the guideline of the recording screen.
Using Menu Functions
Menu list
[Monitor / Display]
(Example)
Dark ← OK → Bright
.
.