Table of Contents
Advertisement
■
Operations that can be performed by pressing the [Wi-Fi] button
If you press the [Wi-Fi] button when you do not have a Wi-Fi connection, the
camera enters a standby mode in which it can connect directly to the smartphone.
(→230)
• If you press the [DISP.] button at that time, you can select a destination from the history
of previous connections and quickly connect.
When the camera is connected to Wi-Fi, you can press [Wi-Fi] button and perform
the following operations.
[Terminate the Connection]
[Change the Destination]
[Change Settings for Sending Images]
[Register the Current Destination to
Favorite]
[Network Address]
• Depending on the Wi-Fi function being used or the connection destination, you may not
be able to perform some of these operations.
224
(→265)
Terminates the Wi-Fi connection.
Terminates the Wi-Fi connection, and allows you to
select a different Wi-Fi connection.
For details (→248).
Registering the current connection destination or the
connection method, you can easily connect with the
same connection method next time.
For details (→267).
Wi-Fi/Bluetooth
Wi-Fi/Bluetooth Function
Advertisement
Table of Contents
Need help?
Do you have a question about the Lumix DC-ZS200 and is the answer not in the manual?
Questions and answers
a take a photo with the dial set at P, push shutter and screen says "recording in Post focus" what does that mean? All I want is a single frame, not a movie.
On the Panasonic Lumix DC-ZS200, "recording in Post Focus" means the camera captures multiple images at different focus points when the shutter is pressed. You can then select and save the desired focus point later during playback. This feature is available when the mode dial is set to P (Program) and [Post Focus] is selected in the drive mode.
This answer is automatically generated