Panasonic Lumix DC-ZS200 Owner's Manual page 184

[Focus/Release Priority]
You can set whether to give higher priority to focusing or shutter release timing when you
take pictures using Auto Focus mode.
You can set the priority for each focus mode ([AFS/AFF], [AFC]) separately.
[FOCUS]
[BALANCE]
[RELEASE]
[Focus Switching for Vert / Hor]
The camera saves the focus positions of a picture separately when it is recorded by
holding the camera vertically and horizontally. The camera saves the following positions
of the picture taken the previous time.
• AF area position (When [
• Position displayed by MF Assist
[Loop Movement Focus Frame]
You can move a focus area from one edge to the opposite edge of the screen in a loop
when the AF area position or MF Assist area display position is set.
[AF Area Display]
You can perform the AF area display setting when the Auto Focus Mode is set to [
(49-area-focusing) or Custom Multi.
Displays the AF area on the recording screen.
[ON] • When the default AF area is selected in [
[
Displays the AF area on the recording screen for only a few seconds after the AF area
[OFF]
is set.
●
The [ON] setting operates as [OFF] in the following cases.
• When recording motion pictures
• Creative Video Mode
• When recording 4K photos
184
No picture is taken unless focusing is achieved.
A picture is taken with an appropriate balance between focusing and shutter
release timing.
A picture is taken even if the subject is out of focus.
], [ ] and [
] of Custom Multi-function, the AF area is not displayed.
→ [Custom] →
] are set)
] (49-area-focusing) or [
Using Menu Functions
Menu list
[Focus / Release Shutter]
], [
]
], or