Table of Contents
Advertisement
Setting the ISO Sensitivity
Recording mode:
Set ISO sensitivity (sensitivity to lighting).
→
[Rec] → [Sensitivity]
1
Select the ISO sensitivity by rotating the
rear dial
ISO sensitivity
AUTO
(Intelligent ISO)
*
[L.80]
2
/ [L.100]
from [125] to
[12800] / [H.25600]
*
1
When [ISO Auto Upper Limit (Photo)] is set to [AUTO].
*
2
Only when [Extended ISO] is [ON].
2
Press [MENU/SET] to set
• You can also press the shutter button halfway to set.
101
Focus, Brightness (Exposure) and Color tone Settings
ISO sensitivity is automatically set in a range up to 3200 (with the
*
flash on: 4000)
ISO sensitivity is automatically set in a range up to 3200 (with the
*
flash on: 4000)
subject.
• The shutter speed is not fixed when the shutter button is pressed
halfway. It is continuously changing to match the movement of the
subject until the shutter button is pressed fully.
*
2
/
ISO sensitivity is fixed at the selected setting.
*
2
1
depending on the brightness of a subject.
1
depending on the movement and brightness of a
1
2
25
0
Advertisement
Table of Contents
Need help?
Do you have a question about the Lumix DC-ZS200 and is the answer not in the manual?
Questions and answers
a take a photo with the dial set at P, push shutter and screen says "recording in Post focus" what does that mean? All I want is a single frame, not a movie.
On the Panasonic Lumix DC-ZS200, "recording in Post Focus" means the camera captures multiple images at different focus points when the shutter is pressed. You can then select and save the desired focus point later during playback. This feature is available when the mode dial is set to P (Program) and [Post Focus] is selected in the drive mode.
This answer is automatically generated