Table of Contents
Advertisement
Select the focus point and save the picture ([Post Focus])
1
On the playback screen, select the image with the
[
] icon and press
• The same operation can be performed by touching [
2
Touch the focus point
• If there are no pictures with the focus on the selected point, a red
frame will be displayed, and pictures cannot be saved.
• The edge of the screen cannot be selected.
Operation
[Fn1]
[Fn2]
[MENU/SET]
• You can make fine adjustments to the focus by dragging the
slide bar during enlarged display. (The same operation can be
performed using
3
Touch [
• The selected picture will be saved as a new separate file in the JPEG format.
120
Adjusting the focus after recording ([Post Focus]/[Focus Stacking])
Touch operation
Touch
.)
] to save the picture
].
Description
Selects focus point
• No selection can be made while display is enlarged.
Enlarges the display
Reduces the display (when in enlarged display)
Switches to [Focus Stacking] operation
In-focus portions are highlighted with color. ([Peaking])
• Switches in order of [
→ [
] ([HIGH]).
Saves the picture
4K Photo and Drive Settings
(→121)
] → [
] ([LOW])
Advertisement
Table of Contents
Need help?
Do you have a question about the Lumix DC-ZS200 and is the answer not in the manual?
Questions and answers
a take a photo with the dial set at P, push shutter and screen says "recording in Post focus" what does that mean? All I want is a single frame, not a movie.
On the Panasonic Lumix DC-ZS200, "recording in Post Focus" means the camera captures multiple images at different focus points when the shutter is pressed. You can then select and save the desired focus point later during playback. This feature is available when the mode dial is set to P (Program) and [Post Focus] is selected in the drive mode.
This answer is automatically generated