Table of Contents
Advertisement
Printing
You can connect a camera directly to a PictBridge-compatible printer for printing.
Preparations
• Adjust the print quality or other settings on your printer, as needed.
• Turn on the camera and printer.
1
Connect camera to printer
• Check the plug direction and insert it straight in. (If the cable is inserted in the
wrong direction, the plug could become deformed and cause faulty operation.)
Also, do not insert into the wrong socket. Doing so may cause damage to this unit.
• Do not use any other USB connection cables except the supplied one.
[
]
• Do not disconnect the USB connection cable (supplied) when the cable disconnection icon
[
] is displayed (may not be displayed with some printers).
[USB/CHARGE] socket
USB connection cable (supplied)
2
Use
to select [PictBridge(PTP)] and press [MENU/SET]
3
Use
4
Use
to select [Print start] and press [MENU/SET]
280
to select a picture and press [MENU/SET]
Connecting with other devices
Advertisement
Table of Contents
Need help?
Do you have a question about the Lumix DC-ZS200 and is the answer not in the manual?
Questions and answers
a take a photo with the dial set at P, push shutter and screen says "recording in Post focus" what does that mean? All I want is a single frame, not a movie.
On the Panasonic Lumix DC-ZS200, "recording in Post Focus" means the camera captures multiple images at different focus points when the shutter is pressed. You can then select and save the desired focus point later during playback. This feature is available when the mode dial is set to P (Program) and [Post Focus] is selected in the drive mode.
This answer is automatically generated